Manual d'usuari LG Electronics 32LY560M Car Satellite TV System

Manual d'usuari pel dispositiu LG Electronics 32LY560M Car Satellite TV System

Manual d'usuari LG Electronics 32LY560M Car Satellite TV System

Extractes de continguts

Resum a la pàgina de contingut no. 1

22LY560M28LY560M32LY560M42LY560MHospital TVsCommercial Mode Setup GuideNote: Selected features shown within this guide may not be available on all models.EXPERIENCED INSTALLERExpress Script Installer Menu Wizardpages 12 – 17Custom Master TV Setuppages 31 – 35FTG Mode of Operationpages 46 – 52© Copyright 2014 LG Electronics U.S.A., Inc.P/N: 206-4261 (Rev A)

Resum a la pàgina de contingut no. 2

For Customer Support/Service, please call:­­1-888-865-3026The latest product information and documentation isavailable online at:www.LGsolutions.comMODEL and SERIAL NUMBERThe model and serial numbers of this TV are located on theback of the cabinet. For future reference, LG suggests thatyou record those numbers here:Model No._________________ Serial No._______________WARNINGRISK OF ELECTRIC SHOCKDO NOT OPENWARNING:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USERSERVI

Resum a la pàgina de contingut no. 3

IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions.4. Follow all instructions.17. Power Cord Caution: It is recommended that appliances be placedupon a dedicated circuit; that is, a single outlet circuitwhich powers only that appliance and has no additionaloutlets or branch circuits. Check the TV specifications.5. Do not use this apparatus near water. Periodically examine the cord of your appliance, and if itsappearance indicates damage or deterioration, unplug it,discontinue use of the app

Resum a la pàgina de contingut no. 4

IMPORTANT SAFETY INSTRUCTIONS(Continued from previous page)22. Outdoor Antenna Grounding If an outside antenna or cable system is connected to theproduct, follow the precautions below. An outdoor antenna system should not be located in thevicinity of overhead power lines or other electric light orpower circuits or where it can come into contact with suchpower lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to providesome protection against vol

Resum a la pàgina de contingut no. 5

Table of ContentsSafety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . .3 – 4Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Commercial Mode Overview . . . . . . . . . . . . . . . . . . . . . . . . . 6 – 9Setup Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Pass-through Mode . . . . . . . . .

Resum a la pàgina de contingut no. 6

Commercial Mode OverviewThis document describes how to set up LY560M Pro:Centric ® TVs for Commercial Mode operation.LG commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Mapresides in the TV’s CPU or Protocol Translator Card (PTC) or it resides externally from the TV (i.e., in adevice from the solution provider).These TV models are capable of Free-To-Guest (FTG) Mode operation via the TV CPU. Alternatively, theTV can be configured for Pass-thro

Resum a la pàgina de contingut no. 7

Commercial Mode Overview (Cont.)Installer MenuTo create a customized Master TV Setup, you will need toknow how to access the commercial controller (PTC)Installer Menu and make changes to the default values asrequired. If necessary, familiarize yourself with the InstallerMenu and how to make and save changes. Refer to pages21 to 30 for information on accessing the Installer Menuand for detailed descriptions of the Installer Menu items.xxLY560M PTC INSTALLER MENUCPU-CTV000 INSTALLER SEQUPN 000-000

Resum a la pàgina de contingut no. 8

Commercial Mode Overview (Cont.)FTG Mode FeaturesFTG Mode provides the following features:• Logical or physical tuning of physical RF channels and Aux inputs.• Mapping of RF channels with minor (program) numbers up to 999.• FTG Channel Map of up to 600 channels.• Start Channel set for RF or Aux input delivered content.• Pro:Centric data delivery over RF or IP.• TV Zoning option for location-specific configuration.LG’s FTG File Manager PC software enables you to create an FTG Config

Resum a la pàgina de contingut no. 9

Commercial Mode Overview (Cont.)Determining the TV Operating ModeTo determine the operating mode of the TV, press MENU on the Installer Remote. The menu displayeddepends on the operating mode. See examples below.If the Function Menu appears, the TV is in a mode (FTG, PPV, etc.) that does not allow the end user tochange the fundamental TV setup. If the TV setup menus appear, the TV is in Pass-through Mode.ASPECT RATIOABCMoveFunction MenuIndicates the TV is not in Passthrough Mode­­. While the T

Resum a la pàgina de contingut no. 10

Pro:Centric OperationPro:Centric Interactive Menu FeaturesLG’s Pro:Centric application enables patients and visitors to locate and select television entertainmentusing an interactive channel guide, check the daily weather, and view hospital and surrounding amenitiesvia custom billboards and points-of-interest maps.Pro:Centric application features include:• Portal and information screens/pages (including a “Welcome” page) that include branding logos.• An optional customized user interfa

Resum a la pàgina de contingut no. 11

Pro:Centric Operation (Cont.)Pro:Centric SetupAdministration and management options for the Pro:Centric server are described in detail in the Pro:CentricServer Admin Client User Guide. This document describes only those settings that must be specified onthe TVs to enable the Pro:Centric remote management facilities and/or the Pro:Centric application.• Remote management (TV E-Z Installation): The Pro:Centric server Admin Client provides remotemanagement facilities for downloading splash screens

Resum a la pàgina de contingut no. 12

Express Script Installer Menu WizardThe Express Script Installer Menu Wizard guides you through the process of setting up the essentialitems for most hospital TV viewing applications and also enables you to configure the Pro:Centricsettings on the TV. The wizard will appear on the screen each time the TV is turned ON, untilconfiguration is completed or the wizard is exited. Use the Installer Remote to make selections andcomplete each wizard step.Before You Begin• If you plan to create a custom

Resum a la pàgina de contingut no. 13

Express Script Installer Menu Wizard (Cont.)Configure Pro:Centric SettingsThe next wizard screen enables you to set up the Pro:Centric feature of the TV. By default, theData Channel is configured for Auto Search, which enables the TV’s Data Channel Auto Searchfeature to set the Data Channel value. See item 119 DATA CHANNEL description on page 30 forfurther information on the Data Channel Auto Search feature. The Pro:Centric Mode default settingis “Configuration Only,” which enables remote

Resum a la pàgina de contingut no. 14

Express Script Installer Menu Wizard (Cont.)(Continued from previous page)2. In the Pro:Centric Mode field, use the Left/Right arrow keys on the Installer Remote to selectthe appropriate Pro:Centric Application Mode—GEM, FLASH, or Configuration Only.3. Once the fields are completed as required, you have two options:• To proceed with TV configuration via the wizard, select Next and press OK on the InstallerRemote. See also “Complete the TV Configuration” below.• To save the data entered

Resum a la pàgina de contingut no. 15

Express Script Installer Menu Wizard (Cont.)(Continued from previous page)3. Select the speaker configuration. Use the Up/Down arrow keys on the Installer Remote to select thespeaker configuration field, and then use the Left/Right arrow keysto select the appropriate speaker: Pillow Only (default), TV Only,or Pillow & TV. When you have made your selection, use the arrowkeys to select Next, and then press OK.4. Select the pillow speaker code. If using a Pro:Centric pillow speaker (LG IR codes) or

Resum a la pàgina de contingut no. 16

Express Script Installer Menu Wizard (Cont.)(Continued from previous page)Note: You MUST select Execute Auto Search and pressOK in order to run the channel scan. If you move on tothe next step without running the Auto Search, there willbe no analog or digital channels in the channel lineup(Channel Map). In this case, upon completion of theExpress Script, the only channels in the resulting PTCChannel Map will be any enabled Aux inputs.7►8Would you like to edit channel map and icons?Edit Channel

Resum a la pàgina de contingut no. 17

Express Script Installer Menu Wizard (Cont.)(Continued from previous page)When you are finished, press MENU to close the pop-up window.Use the arrow keys to select Next, and then press OK.Installer Menu Wizard1 ► 2 ► 3 ► 4 ► 5 ► 6 ► 7 ►8. Completion.In the final step, the TV saves your settings and transfers the setupto the commercial controller (PTC). (This is similar to 2-5-5 + MENUMode during Custom Master TV Setup.) When this step is complete,the Express Script Installer Menu W

Resum a la pàgina de contingut no. 18

Ez Download UtilityThe Ez Download utilty, available from the TV Manager / USB Download Menu, enables you to selectmultiple files at one time from the files loaded on a USB memory device. You may use this utility todownload any one or all of the following to a TV: a TLX file for configuration purposes, a TLL file forcloning purposes (legacy), a TV CPU or PTC software update, a splash screen image.Before You Begin• Ensure the USB device has been formatted with FAT format.• Software upgrade an

Resum a la pàgina de contingut no. 19

Ez Download Utility (Cont.)(Continued from previous page)4. To access the TV Manager / USB Download Menu from the TV menus:• Press MENU on the Installer Remote to display the TV setup menus(TV is in Pass-through Mode) or the Function Menu (TV is not inPass-through Mode).• Use the arrow navigation keys to select/highlight either the Optionmenu icon from the TV setup menus or the Lock menu icon from theFunction Menu. Then, press the number “7” key a total of seven times.5. With the TV Mana

Resum a la pàgina de contingut no. 20

Ez Download Utility (Cont.)(Continued from previous page) Note: There are no options available/applicable for TLL files.Note: Press on the Installer Remote, as necessary, to exit the Ez Download screen and/orthe TV Manager / USB Download Menu and return to TV viewing.8. When you are ready to continue, use the arrow keys on the Installer Remote to select Apply,and then press OK.The TV will show download progress in a new window. Do NOT remove the USB device untildownloading is complete. When the